This guide shows you how to use Eblth Cleaning Solution to clean your steam (mist) fireplace, clear residue from the mist system, and restore a stronger, clearer flame effect.

Clean the fireplace with Eblth Cleaning Solution

1. Prepare the Eblth Cleaning Solution.
2. Mix it with clean water (follow the product instructions for dilution).
3. Fill the tank with the cleaning mixture using the normal filling method:
   • How to add water
4. Let the mixture sit for 30 minutes.
5. Drain the tank completely and do not reuse the drained water:
   • How to drain water
6. Optional but recommended: Refill the tank with clean water, then drain it again to rinse out any remaining solution.
7. Fill the tank with fresh clean water and start the fireplace — you should notice a stronger, clearer flame.

If it doesn’t work

• Flame is still weak: Do one more rinse cycle (fill with clean water → drain again).
• Mist output is unstable: Make sure you drained the tank fully before refilling.
• Performance drops again quickly: You may need to clean more often depending on water quality.

Remember

• Clean once a month for best performance.
• Never add essential oils or fragrances into the fireplace — they can damage the mist system.