This guide shows you how to use Eblth Cleaning Solution to clean your steam (mist) fireplace, clear residue from the mist system, and restore a stronger, clearer flame effect.
Clean the fireplace with Eblth Cleaning Solution
- Prepare the Eblth Cleaning Solution.
- Mix it with clean water (follow the product instructions for dilution).
- Fill the tank with the cleaning mixture using the normal filling method:
- Let the mixture sit for 30 minutes.
- Drain the tank completely and do not reuse the drained water:
- Optional but recommended: Refill the tank with clean water, then drain it again to rinse out any remaining solution.
- Fill the tank with fresh clean water and start the fireplace — you should notice a stronger, clearer flame.
If it doesn’t work
- Flame is still weak: Do one more rinse cycle (fill with clean water → drain again).
- Mist output is unstable: Make sure you drained the tank fully before refilling.
- Performance drops again quickly: You may need to clean more often depending on water quality.
Remember
- Clean once a month for best performance.
-
Never add essential oils or fragrances into the fireplace — they can damage the mist system.
